在线客服

PRODUCTS

RT100 Rough Terrain Crane

• Full-wheel drive, large ground clearance and strong off-road performance. It is suitable for off-road travel
• Full-extension, half-extension and full-withdrawing leg operation, no-leg operation and driving with load
• Full-wheel steering, short wheel base, small turning radius, strong maneuverability; it is applicable to driving and operation in a narrow field
• The cab and operating room are integrated into one. Comprehensive lifting operation increases lifting capacity of the front.
• The main boom adopts big rounded polygonal cross section and ultra thin sheet with partial reinforcement, which brings the materials' mechanical properties into full play, gives the materials good resistance to buckling and good elasticity and greatly reduces the main boom weight.
• The utilization of network node control technique can realize intelligent fault diagnosis, facilitate the troubleshooting for the electrical system of the complete vehicle and improve the maintainability of the electrical system.

TypeSer. No.ItemUnitValue
Working performance1Max. rated lifting weight × working radiuskg.m100000×3.0
2Max. lifting moment of basic boomkN.m3319
3Max.lifting moment of longest boomkN.m1388
4Max. lifting height of longest boomm45.6(to the center of head pulley )
5Max. lifting height of jibm63
Dimensions6Outline dimensions (L×W×H)mm14247×3620×3960
7Distance between outriggers (longitudinal × transversal)mm8000×7900
8Main boom length (completely retracted – completely extended)mm11500~43000
9Jib length (completely retracted – completely extended)mm10800~18500
10Main boom angle of elevation°-3~78
11Swing range 360°unlimited swing (Full range)
Working speed12Max.speed of single rope on the drum of main winchm/min126
13Boom extension times170
14Boom retraction times158
15Boom derricking up times82
16Boom derricking down times69
17Swing speedr/min0~1.5
Hydraulic system18Rated working pressureMPa30
19Rated working flowL/min500
20Hydraulic oil tank capacityL1200
Mass21Complete vehicle kerb masskg65000
22Front axle loadkg33200
23Rear axle loadkg31800
Traveling24Max. traveling speed (forwards / backwards)km/h24/15
25Wheelbasemm4600
26Treads (front / rear)mm2860


TypeSer. No.ItemUnitValue
Working performance1Max. rated lifting weight × working radiuskg.m100000×3.0
2Max. lifting moment of basic boomkN.m3319
3Max.lifting moment of longest boomkN.m1388
4Max. lifting height of longest boomm45.6(to the center of head pulley )
5Max. lifting height of jibm63
Dimensions6Outline dimensions (L×W×H)mm14247×3620×3960
7Distance between outriggers (longitudinal × transversal)mm8000×7900
8Main boom length (completely retracted – completely extended)mm11500~43000
9Jib length (completely retracted – completely extended)mm10800~18500
10Main boom angle of elevation°-3~78
11Swing range 360°unlimited swing (Full range)
Working speed12Max.speed of single rope on the drum of main winchm/min126
13Boom extension times170
14Boom retraction times158
15Boom derricking up times82
16Boom derricking down times69
17Swing speedr/min0~1.5
Hydraulic system18Rated working pressureMPa30
19Rated working flowL/min500
20Hydraulic oil tank capacityL1200
Mass21Complete vehicle kerb masskg65000
22Front axle loadkg33200
23Rear axle loadkg31800
Traveling24Max. traveling speed (forwards / backwards)km/h24/15
25Wheelbasemm4600
26Treads (front / rear)mm2860

ONLINE MESSAGE

Position: HOME>ZOOMLION