在线客服

PRODUCTS

XE900C Crawler Excavator

1. The parallel position of radiator and oil cooler ensures the heat balance in various complex working conditions.
2. The counterweights loaded from the rear end improve the disassembling efficiency.
3. The central overhaul passageway offers more convenient maintenance.
4. Double-row four point contact ball slewing bearing ensures the stable slewing when heavy loaded.
The excavator can meet the requirement of heavy-load excavating and rugged construction environment, featuring better durability, reliability, and safety.

型号单位XE900C
操作重量 Operating weightkg88800
铲斗容量 Standard bucket capacity4.0~5.0
发动机发动机型号 Engine Model/Cummins QSX15
直喷 Direct injection/
4冲程 Four strokes/
水冷 Water cooling/
涡轮增压 Turbo charged/
空空中冷 Air to air intercooler/
缸数 No. of cylinders/6
发动机输出功率 Rated power/speedkw/rpm395/1800
最大扭矩/转速 Max. torque/speedN.m2365/1400
排量 DisplacementL15
主要性能行走速度 Travel speedkm/h3.9/2.7
回转速度 Swing speedr/min7.3
爬坡能力 Max. gradeability/≥30
接地比压 Ground pressurekPa115
铲斗挖掘力 Max.Bucket digging forcekN479
斗杆挖掘力 Max.arm crowd forcekN368
最大牵引力 Max.traction forcekN629
液压系统主泵 Main pump/两个柱塞泵
主泵额定流量 Rate flow of main pumpL/min2×521
主安全阀压力 Max pressure of prime relief valveMPa31.4/34.3
行走系统压力 Max pressure of travel systemMPa34.3
回转系统压力 Max pressure of swing systemMPa30
先导系统压力 Max pressure of pilot systemMPa3.9
油类容量燃油箱容积 Fuel tank capacityL1225
液压油箱容积 Hydraulic tank capacityL755
发动机油容量 Engine lubricationL48
外形尺寸A总长 Overall lengthmm13570
B总宽 Overall widthmm4550
C总高 Overall heightmm5090
D转台宽度 Overall width of upperstructuremm3350
E履带长度 Track lengthmm5840
F底盘总宽 Overall width of undercarriagemm4550
G履带宽度 Crawer width750
H履带轴距 Track length on groundmm4545
I轨距 Crawer gaugemm2960/3500
J配重离地间隙 Clearance under counter weightmm1680
K最低离地间隙 Ground clearancemm880
L尾部最小回转半径 Min.tail swing radiusmm4700
工作范围A最大挖掘高度 Max. digging heightmm12060
B最大卸载高度 Max. dumping heightmm8070
C最大挖掘深度 Max. digging depthmm7250
D8英尺水平面挖掘深度8inch horizonal digging depthmm7100
E最大垂直挖掘深度 Max. vertical wall digging depthmm4200
F最大挖掘半径 Max. digging reachmm12330
G最小回转半径 Min. swing radiusmm5200
动臂偏转角度 Angle of arm deflection Degree


ONLINE MESSAGE

Position: HOME>XCMG